Table of Contents
Advertisement
Setting up the system
Digital connections
The digital in jacks can accept DTS,Dolby Digital,or PCM signals.Connect components capable of outputting DTS,Dolby Digital or PCM (CD)
digital signals.
If you have connected a DVD player to the receiver with digital connection,be sure to read the "Input mode settings", "Re-assignment of rear panel
jacks" section carefully. 8•
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhibited from the analog stereo outputs of the CD or DVD player. To enjoy
DTS Digital Surround™ playback, this unit must be connected to the digital output of the CD or DVD player.
For U.S.A. and Canada
(ASSIGNABLE)
DIGITAL IN
OPT 1
OPT 2
COAX 2
(VIDEO 2)
(VIDEO 1)
(AUX)
COAX 1
(DVD)
OPTICAL DIGITAL OUT (AUDIO)
(Optical fiber cord)
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
COAXIAL DIGITAL
OUT (AUDIO)
(Coaxial cord)
12
EN
CD player or DVD player
Component with DTS,
Dolby Digital,or PCM
OPTICAL DIGITAL OUT
Connect the analog audio signals
to the AUX jacks.
(See "Connecting video compo-
nents, audio components ". 0)
Satellite Cable Tuner
Connect the video signal and ana-
log audio signals to the VIDEO 2
jacks.
(See "Connecting video compo-
nents, audio components ". 0)
For Europe and Australia
DIGITAL IN
(ASSIGNABLE)
COAX 2
OPT 1
OPT 2
(VIDEO 2)
(VIDEO 1)
(AUX)
COAX 1
(DVD)
OPTICAL DIGITAL OUT (AUDIO)
(Optical fiber cord)
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
COAXIAL DIGITAL
OUT (AUDIO)
(Coaxial cord)
CD player or DVD player
Component with DTS,
Dolby Digital,or PCM
OPTICAL DIGITAL OUT
Connect the analog audio signals
to the AUX jacks.
(See "Connecting video compo-
nents, audio components ". !)
Satellite Cable Tuner
Connect the video signal and ana-
log audio signals to the VIDEO 2
jacks.
(See "Connecting video compo-
nents, audio components ". !)
Hide quick links:
Advertisement
Table of Contents
