Download  Print this page

Recording; Analog Sources; Digital Sources - Kenwood VRS-7100 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Recording

Analog sources

1 Use the INPUT SELECTOR key (or the input selector key)
to select the source (other than "VIDEO 1") you want to
record.
2 Put the component connected to the VIDEO 1 jacks to the
record-pause mode.
3 Start playback, then start recording.
÷ Recording may not be normal for some video software. This
is due to the copy guard condition. P

Digital sources

Switch on the REC MODE to record a digital input source.
When the digital mode changes during recording in the REC MODE, the
audio signal may be interrupted momentarily.
Recording music in REC mode
When a multi-channel source such as the Dolby Digital or DTS input signal is
recorded in REC mode, the signal in the current surround mode can be recorded
down-mixed to 2-channel.
1 Use the INPUT SELECTOR key (or the Input Selector
keys) to select the source (DVD, VIDEO 2, AUX, GAME)
you want to record.
2 Put the component connected to the VIDEO 1 jacks to the
record-pause mode.
3 Press and hold the SETUP key (or Setup key) for more
than 2 seconds to select the "REC MODE".
1 REC mode off
2 "REC MODE": REC mode on
Multi-channel digital signals (DTS or Dolby
Digital) are down-mixed to 2-channel
before being output from the analog
recording (REC OUT) jacks.
32
EN
INPUT SELECTOR
INPUT SELECTOR
SETUP
R
E
V
I
The display switches automatically.
4 Start playback, then start recording.
C
M
O
D
E
D
E
O
2
R

Advertisement

Table of Contents
loading

  Also See for Kenwood VRS-7100

  Related Manuals for Kenwood VRS-7100