Normal Playback; Listening To A Source Component - Kenwood VRS-6200 Instruction Manual

Normal playback

Some preparatory steps are needed before starting playback.
RECEIVER
INPUT MODE
ON/STANDBY
INPUT MODE
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
ON/STANDBY key (or
Selecting the input mode
If you have selected a component connected to the COAXIAL DVD,
OPT. VIDEO or DIGITAL IN (OPTICAL) jacks, make sure that the input
mode setting is correct for the type of audio signal to be used. 7
20 EN
INPUT SELECTOR
RECEIVER key).

Listening to a source component

Input selector keys
VOLUME %/fi
F.AUX MODE
1
Press the INPUT SELECTOR key (or the input selector keys:
TUNER, VIDEO, DVD, AUX, GAME/ F.AUX) to select the source
you want to listen to.
1 Tuner (FM/AM broadcast reception)
2 "VIDEO"
3 "DVD"
4 "AUX"
5 "GAME" (or "FRONT AUX")
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOLUME % / fi keys)
to adjust the volume.
Set up the GAME/FRONT AUX jacks on the front panel
Perform the setup for convenience of playing a video game using the
receiver.
1 Use the INPUT SELECTOR key (or the GAME/ F.AUX key)
to select "GAME" (or "FRONT AUX").
2 Press the F.AUX MODE key for the following selections:
1 "GAME":
When the connected game player is turned ON, the input
selector is switched automatically to "GAME". In addition, the
ACTIVE EQ function is switched to "EQ GAME" and the listen
mode is switched to the appropriate mode for games.
2 "FRONT AUX":
The game mode is switched OFF.
÷ The game mode is not activated if no video signal is input to the VIDEO
jack in the GAME/FRONT AUX jack section.
INPUT SELECTOR
VOLUME CONTROL