Download  Print this page

Kenwood VRS-6200 Instruction Manual page 18

Audio video surround receiver
Hide thumbs

Advertisement

Preparing for playback
5
Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The volume
levels from each speaker should be the same.
÷ In steps 5, indications appear only for the selected channels of the
speakers that require adjusting.
1 Press the SETUP key to begin TEST TONE.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "AUTO" or "MANUAL".
1 "AUTO": Select this setting to adjust the speaker volume
levels using the test tone. The test tone will be output from
every speaker channel in automatic sequence.
2 "MANUAL":Select this setting to select the speaker chan-
nel to output the test tone using the SETUP key.
Press the SETUP key again select either "AUTO" or
"MANUAL".
Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the volume level of
the test tone output from the speaker channel to
be adjusted.
For "AUTO" selection, the first test tone is heard from
the front left speaker for 2 seconds. The next test tone
is heard from the speakers in the following sequence
for 2 seconds each.
The channel indication blinks while the test tone is being output.
÷ If you change the volume level settings for the speakers
while listening to music, the settings referred to on this
page are also changed.
÷ When a speaker setup is set to off the volume level for
the corresponding speakers is reset to 0 dB.
For "MANUAL" selection, press the SETUP key each
time to select the speaker channel, and use the MULTI
CONTROL button (or the MULTI CONTROL %/fi keys)
to adjust the volume level.
3 Press the SETUP key to accept the setting.
÷ The test tone is turned off. This model enters the mode
for inputting the distance to the speakers.
18
EN
¤
6
Input the distance to the speakers.
This setting allows the signals output from different speakers to reach
the listening position simultaneously.
÷ In steps 6, indications appear only for the selected channels of the
speakers that require adjusting.
Measure the distance from the listening position to each
of the speakers.
Jot down the distance to each of the speakers.
Distance to Front speaker (L)
Distance to Center speaker (C)
Distance to Front speaker (R)
Distance to Surround speaker (RS)
Distance to Surround back speaker (RB)
Distance to Surround back speaker (LB)
Distance to Surround speaker (LS)
1 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "DISTANCE" on
setup displays, and press the SETUP key.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the distance to the
front speakers.
The speaker indicator to be adjusted blinks.
÷ The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
Indication in feet
3 Press the SETUP key to accept the setting.
4 Repeat steps 2 and 3 to input the distance for each of
the speakers.
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
Indication in meters
Continued to next page

Advertisement

loading

  Related Manuals for Kenwood VRS-6200