Specifications (Except For The U.s.a., Canada, Europe And Australia) - Kenwood VRS-6200 Instruction Manual

Specifications
(Except for the U.S.A., Canada, Europe and Australia)
AUDIO section
Rated power output during STEREO operation
65 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
Rated power output during STEREO operation .......... 80 W + 80 W
Effective power output during STEREO operation ...... 100 W + 100 W
Effective power output during SURROUND operation
FRONT ....................................................................... 80 W + 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
.........................
FRONT ...................................................................
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
CENTER .................................................................................. 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
CENTER ................................................................................
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
SURROUND .............................................................. 80 W + 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
Total harmonic distortion .......................... 0.05% (1 kHz, 50 W, 8 Ω)
Frequency response
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
................................................... 20 Hz ~ 90 kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF' 66)
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX) ........... 96 dB
Input sensitivity / impedance
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
.............................................................................. 500 mV / 40 kΩ
Output level / impedance
REC OUT ................................................................ 500 mV / 1 kΩ
PRE OUT (SURROUND BACK) .......................... 700 mV / 2.2 kΩ
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩ
Tone control
BASS ................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)
Loudness control
VOLUME at –30dB level .................................. +8 dB (at 100 Hz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical: VIDEO, GAME (or FRONT AUX)
....................................... (–15 dBm ~ –21 dBm), 660 nm ±30 nm
Coaxial: DVD ......................................................... 0.5 Vp-p / 75 Ω
VIDEO section
Input sensitivity / impedance
Composite: DVD, VIDEO, GAME (or FRONT AUX)
.................................................................................. 1 Vp-p / 75 Ω
Output level / impedance
Composite: VIDEO, MONITOR OUT ..................... 1 Vp-p / 75 Ω
DIN/IEC (1 kHz, 0.7% T.H.D. at 8 Ω )
(1 kHz, 10% T.H.D. at 8 Ω)
100 W + 100 W
100 W + 100 W
FM tuner section
Tuning frequency range ..................................... 87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO .............................. 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev)
Total harmonic distortion (1 kHz)
MONO .......................................................... 0.5% (71.2 dBf input)
STEREO ....................................................... 0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz)
MONO ........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Selectivity (±400 kHz) ................................................................. 70 dB
Stereo separation (1 kHz) ........................................................... 40 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
10 kHz step .................................................. 530 kHz ~ 1,610 kHz
100 W
9 kHz step .................................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
........................................................................ 50 dB (1 mV input)
GENERAL
Power consumption .................................................................. 150 W
Standby power consumption ................................................... 0.3 W
Dimensions ....................................................... W: 440 mm (17-5/16")
Weight (Net) .................................................................. 7.9 kg (17.4 lb)
Notes
1. KENWOOD follows a policy of continuous advancements in develop-
ment. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
H : 079 mm (3-1/8")
D : 357 mm (14-1/16")
39 EN