Let's Play Dvd Video Software - Kenwood VRS-6200 Instruction Manual

Let's play DVD video software

CAUTION
Make sure that the power cord plug is disconnected from the AC wall outlet before proceeding to speaker cord connections.
If the conductor wires on the extremity of speaker cord are untwisted, there is a risk of short-circuiting. Be sure to twist them well before
connecting the speaker cord.
Connect the speakers, DVD and TV
STEP 1
to the receiver.
For details, see "Setting up the system" 7 ~ !
Connection of speakers:
SPEAKERS (8-16Ω)
R L C R L
FRPNT SURR
DIGITAL IN
SW L R
Powered Front
subwoofer Speakers
L
LS
Connection of DVD player:
Digital audio connection
(Coaxial code)
SPEAKERS (8-16Ω)
R L C R L
FRPNT SURR
Connection of TV monitor:
SPEAKERS (8-16Ω)
R L C R L
FRPNT SURR
14
EN
ANTENNA
OPT.
L
VIDEO COAXIAL AM GND FM 75Ω
L
DVD
R
R
SUB WOOFER SURROUND BACK REC OUT PLAY IN IN
AUX IN
PRE OUT
VIDEO OUT VIDEO IN VIDEO IN
VIDEO DVD MONITOR
C LS RS
Center
Speaker
C
R
RECEIVER
DVD
SW
Analog audio connection
Composite video
connection
ANTENNA
OPT.
L
VIDEO COAXIAL
L AM GND FM 75Ω
DVD
R
DIGITAL IN
R
REC OUT PLAY IN IN
SUB WOOFER SURROUND BACK AUX IN
PRE OUT
VIDEO OUT VIDEO IN VIDEO IN
VIDEO DVD MONITOR
Composite video
connection
ANTENNA
OPT.
L
VIDEO COAXIAL AM GND FM 75Ω
L
DVD
R
DIGITAL IN
R
SUB WOOFER SURROUND BACK REC OUT PLAY IN IN
AUX IN
PRE OUT
VIDEO OUT VIDEO IN VIDEO IN
VIDEO DVD MONITOR
STEP 2
For details, see "Speaker settings" . ^ ~ (
ON/STANDBY
1
Connect the power cord to the AC wall outlet and press the
ON/STANDBY
2
Press the SETUP key, press the MULTI CONTROL button to
LS select "SP SETUP" and press the SETUP key.
Surround
Speakers
If you connect KENWOOD speaker system
KS-2200HT, KS-3200HT, KS-5200HT, KS-7200HT or
KS-8200HT:
RS
1 Press the MULTI CONTROL button to select the model of
the connected speaker system, and press the SETUP key.
1 "HTB 1": Speaker system KS-2200HT*.
2 "HTB 2": Speaker system KS-3200HT*, KS-5200HT*, KS-7200HT*.
3 "HTB 3": Speaker system KS-8200HT*.
* Model availability may differ depending on the country and
sales area.
÷ When the speaker setting is set to "HTB 1", "HTB 2" or
"HTB 3", the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY
DIGITAL EX listen modes cannot be selected.
2 When "TEST TONE" is displayed, press the MULTI
CONTROL button to select "EXIT" and then press the
SETUP key.
÷ More detailed settings such as the volume level of each speaker
and distance to each speaker are also available. * ~ (
Set up the speakers.
INPUT SELECTOR
MULTI CONTROL @ / #
key.
Continued to next page
SETUP