Download  Print this page

Connecting Video Components, Audio Components; Digital Connections - Kenwood VRS-6200 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Setting up the system

Connecting video components, audio components

Audio components
AUDIO LINE OUT (Audio cord)
VIDEO IN (Yellow RCA
pin cord)
Monitor TV
REC OUT PLAY IN
AUDIO LINE
AUDIO LINE
IN
(Audio cord)
(Audio cord)
Video deck, Cassette
deck or MD recorder
AUX IN
MONITOR
REC OUT PLAY IN
VIDEO OUT
VIDEO IN
VIDEO
VIDEO IN
OUT
(Yellow RCA
pin cord)
VIDEO OUT
(Yellow RCA
pin cord)

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals.
Connect components capable of outputting DTS, Dolby Digital or
PCM (CD) digital signals.
If you have connected components with the digital audio output to the
L
receiver with digital connection, be sure to read the "Input mode settings"
section carefully. 7
R
OPT.
VIDEO
DIGITAL IN
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhib-
ited from the analog stereo outputs of the CD or DVD player. To
enjoy DTS Digital Surround™ playback, this unit must be con-
nected to the digital output of the CD or DVD player.
COAXIAL
DVD
CD player
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO jacks.
(See "Connecting video compo-
nents, audio components".)
9
EN

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood VRS-6200