JUKI LK-1900B/IP-420 Instruction Manual page 70

No.
Motion method of wiper can be selected.
: Motion together with presser rise
Motion while presser is held down (Wiper does
:
not return at the last thread trimming. )
Motion while presser is held down (Wiper
:
returns at the last thread trimming. )
: Magnet type wiper
Tie stitching at the start of sewing of button can be
prohibited.
This item is not displayed for the machines other than LK-1903B.
: Tie stitching effective
: Tie stitching ineffective
Unit of sewing shape size change can be selected.
: % input
: Actual size input
Origin position is located on the front side by 5 mm.
This item is necessary when using the presser and pattern for LK-1904.
: Standard
: Front side
Used to select either common or individual for the 2-step
work clamp height stroke
： Common
： Individual (can be set for each direct pattern)
Used to set display/hide of the last stitch position travel
： Non-display
： Display
Used to set the fan operation
： Energy saving mode
： Constant operation
Item
– 66 –
Setting range Edit unit
― ―
― ―
― ―
― ―
― ―
― ―
― ―
Initial display
In case of LK-
1903B/BR35,