JUKI LK-1900B/IP-420 Instruction Manual page 24

③ Lower the presser with the foot switch.
The work clamp feet do not go up even
when the foot switch is detached.
④ Proceed stitching with the presser lowered.
Check the shape with PRESSER BACK button
C and PRESSER FORWARD button
D .
When holding pressing the button for a certain
time, the presser continues to move even when
the button is released.
When you desire to stop, press STOP button
G . When ORIGIN MOVE button
pressed, the machine moves to the origin and the
screen returns to the sewing screen.
When pressing the presser forward or presser backward button with the needle bar lowered, the
presser moves after automatically returning the needle bar to UP position. So, be careful.
⑤ Finish checking the shape.
When CANCEL button
When the presser is not in the sewing start position or the sewing end position, press the foot switch.
Then it is possible to sew from the midway of checking.
F is
E is pressed, the screen returns to the sewing screen.
– 20 –
C
E
D
F
G