JUKI LK-1900B/IP-420 Instruction Manual page 57

Button and display
A
COMBINATION DATA NAME display Name which is inputted in the combination data being selected is displayed.
B
THREAD CLAMP button
C
PRESSER DOWN button
D
RETURN TO ORIGIN button
E
COMBINATION DATA No. display Combination data No. being selected is displayed.
F
PATTERN BUTTON No. display
G
SEWING SHAPE display
H
SEWING ORDER RETURN button
I
SEWING ORDER ADVANCE button Pattern to be sewn can be advanced by one.
J
SEWING ORDER ADVANCE button Pattern to be sewn can be advanced by one
K
TOTAL NUMBER OF
REGISTERS display
L
TOTAL NUMBER OF STITCHES
display
M
THREAD TENSION display
N
TRAVEL AMOUNT IN X
DIRECTION display
O
COUNTER VALUE CHANGE
button
P
COUNTER CHANGEOVER
button
Effective/ineffective of thread clamp is selected.
: Thread clamp ineffective
: Thread clamp effective
* When the prohibition of the thread clamp is set with memory switch
, the thread clamp button is not displayed.
Presser can be lowered and the presser down screen is displayed.
To raise the presser, press the presser up button displayed in the presser
down screen.
Presser can be returned to the start of sewing and is raised.
Pattern button No. being sewn is displayed.
Sewing shape which is registered to pattern button No. being sewn is displayed.
Pattern to be sewn can be returned by one.
Total number of patterns which is registered to combination No. being sewn
is displayed.
Total number of stitches of sewing shape being sewn is displayed.
Thread tension value which is registered to pattern button No. being sewn is displayed.
Travel amount in X direction which is registered to the pattern button No.
being sewn is displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to
"12. USING COUNTER" p.30
Display of sewing counter/No. of pcs. counter can be changed over.
→ Refer to
"12. USING COUNTER" p.30
– 53 –
Description
.
.