JUKI LK-1900B/IP-420 Instruction Manual page 11

Button and display
I
X ACTUAL SIZE VALUE display
J
X SCALE RATE SETTING button Scale rate in X direction of sewing shape being selected at present is
K
Y ACTUAL SIZE VALUE display
L
Y SCALE RATE SETTING button Scale rate in Y direction of sewing shape being selected at present is
M
MAX. SPEED LIMITATION
N
FOLDER No. display
O
FOLDER SELECTION button
P
PATTERN REGISTER button
Actual size value in X direction of sewing shape being selected at present is
displayed.
When the actual size value input is selected by setting memory switch
, X actual size value setting button is displayed.
→ Refer to
"6. PERFORMING ITEM DATA CHANGE" p.17
displayed on this button.
When the scale input is set to non-selection by setting memory switch
, the button goes out and the X scale is displayed.
→ Refer to
"6. PERFORMING ITEM DATA CHANGE" p.17
Actual size value in Y direction of sewing shape being selected at present is
displayed.
When the actual size value input is selected by setting memory switch
, Y actual size value setting button is displayed.
→ Refer to
"6. PERFORMING ITEM DATA CHANGE" p.17
displayed on this button. When the scale input is set to non-selection by
setting memory switch
displayed.
→ Refer to
"6. PERFORMING ITEM DATA CHANGE" p.17
Maximum speed limitation which is set at present is displayed on this button
and when the button is pressed, the item data change screen is displayed.
→ Refer to
"6. PERFORMING ITEM DATA CHANGE" p.17
Pattern register button which is displayed indicates the folder No. which has
been stored.
Folders to display the patterns are displayed in order.
PATTERN REGISTER buttons stored in N FOLDER No. display are
displayed.
→ Refer to
"14. PERFORMING NEW REGISTER OF PATTERN BUTTON"
p.35 .
– 7 –
Description
, the button goes out and the Y scale is
.
.
.
.
.