JUKI LK-1900B/IP-420 Instruction Manual page 123

There are 9 items of the check programs below.
Touch panel compensation screen
→ Refer to
"34-2 Performing compensation of
touch panel" p.120
LCD check
→ Refer to
"34-3 Performing LCD check" p.123
Sensor check
→ Refer to
"34-4 Performing sensor check"
p.124
.
Machine speed
→ Refer to
"34-5 Number of rotations of main
motor check" p.127
Output check
→ Refer to
"34-6 Performing output check" p.128
.
Adjusting X/Y origins
→ Refer to
"34-7 Performing X/Y motors/origin
sensors check" p.130
Adjusting presser and thread trimmer
→ Refer to
"34-8 Performing presser/thread
trimmer motor/origin sensor check" p.131
Adjusting thread clamp
→ Refer to
"34-9 Performing thread clamp motor/
origin sensor check" p.132
Continuous operation
→ Refer to
"34-10 How to carry out the
continuous operation" p.133
* For the LK-1903B/BR, the continuous operation is disabled.
.
.
.
.
.
.
.
– 119 –