JUKI LK-1900B/IP-420 Instruction Manual page 10

Button and display
A
PATTERN BUTTON NEW
REGISTER button
B
USERS' PATTERN NEW
REGISTER button
C
THREAD CLAMP button
D
PRESSER DOWN button
E
BOBBIN WINDER button
F
SEWING SHAPE No. display
G
SEWING SHAPE SELECTION
button
H
NEEDLE THREAD TENSION
SETTING button
Pattern button new register screen is displayed.
→ Refer to
"14. PERFORMING NEW REGISTER OF PATTERN BUTTON"
p.35 .
Users' pattern new register screen is displayed.
→ Refer to
"13. PERFORMING NEW REGISTER OF USERS' PATTERN"
p.34 .
Effective/ineffective of thread clamp is selected.
: Thread clamp ineffective
: Thread clamp effective
* When the prohibition of thread clamp is set with memory switch
the thread clamp button is not displayed.
Presser can be lowered and the presser down screen is displayed.
To raise the presser, press the presser up button which is displayed in the
presser down screen.
Bobbin thread can be wound.
→ Refer to
"11. WINDING BOBBIN THREAD" p.29
Kind and No. of the sewing shape being selected at present are displayed.
There are three kinds of sewing shapes below.
: Standard pattern
: Media pattern
: Users' pattern
Sewing shape being selected at present is displayed on this button and
when the button is pressed, the sewing shape selection screen is displayed.
→ Refer to
"4. PERFORMING SEWING SHAPE SELECTION" p.11
Needle thread tension value which is set to the pattern data being selected
at present is displayed on this button and when the button is pressed, the
item data change screen is displayed.
→ Refer to
"6. PERFORMING ITEM DATA CHANGE" p.17
– 6 –
Description
.
,
.
.