Table of Contents
Advertisement
③ Input the data.
Input the value you desire with ten keys and +/-
keys E .
④ Determine the data.
When ENTER button
data is determined.
* For the other item data, the data can be changed
by the same operation.
* X/Y scale or X/Y value of X/Y actual size value
can be inputted in one screen.
When turning OFF the power without pressing READY key, the set values of pattern No. , X/Y scale,
and number of max. rotation are not memorized.
In the case of adding or deleting the thread
tension and the thread tension command for the
patterns stored on a medium, the pattern type
section display H will change from
In case of change display H , the change con-
firmation screen is displayed at the time of the
change of pattern.
When ENTER button
information on the current pattern is invalidated
and the pattern No. is changed.
To store the changed pattern, refer to
FORMING NEW REGISTER OF USERS' PAT-
TERN" p.34
.
F is pressed, the
to
.
I is pressed, the
"13. PER-
– 18 –
E
H
F
I
Hide quick links:
Advertisement
Table of Contents
