Sleep Timer - Kenwood C-V751 Instruction Manual

Kenwood av control center instruction manual
Hide thumbs Also See for C-V751:
Table of Contents

Advertisement

58
Check the reservation content.
Main unit
TIMER
MODE
Select the TIMER number to be checked.
When timer operation is not required
Press so that all TIMER No. indicators are
TIMER
MODE
OFF
To set the same timer program again
TIMER
MODE
Press so that the desired TIMER No. indica-
tors light.
2
Set the
(ON/STANDBY) switch to STANDBY.

Sleep timer

Setting the number of minutes until the unit
is put to standby mode.
1 Select the "sleep" icon
(Remote control only)
GRC
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1 ...... (Contents of the timer 1 are displayed.)
2 TIMER 2 ...... (Contents of the timer 2 are displayed.)
3 TIMER 1, 2 .. (Contents of the timer 1 and timer 2 are displayed.)
4 Off
÷ The reserved contents will be displayed for 2 seconds per item. After
this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the
beginning.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1 ...... (Only the timer 1 is carried out.)
2 TIMER 2 ...... (Only the timer 2 is carried out.)
3 TIMER 1,2 ... (Both timers 1 and 2 are carried out.)
4 Off ............... (No timer operation is carried out.)
÷ The reservation contents are held in memory.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1 ...... (Only the timer 1 is carried out.)
2 TIMER 2 ...... (Only the timer 2 is carried out.)
3 TIMER 1,2 ... (Both timers 1 and 2 are carried out.)
4 Off ............... (No timer operation is carried out.)
÷ Also prepare the disc or tape and adjust the listening volume.
Main unit
ON/STANDBY
÷ This unit is turned STANDBY automatically after the set time has
elapsed.
÷ While the SLEEP indicator is lit, the remaining sleep time is displayed
in the Sleep area of the GRC display.
÷ Each press increases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
10=20=30...70=80=90=0=10=20...
s L E E P 9 )
M
M
W
W
To cancel
Turn STANDBY or select "Sleep" icon repeatedly until the
sleep time is cancelled (0).
Timer operation
T
Lights in green.
Lights up.
AUTO SOUND
DTS DOLBY
PRO LOGIC
MHz SLEEP
KHz TIMER 1 2 TAPE2/
Duration for sleep timer.
DIGITA
DIGITA
DIGITA
3 ST
DOWN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents