Sleep Timer - Kenwood C-V351 Instruction Manual

Av control center
Hide thumbs Also See for C-V351:
Table of Contents

Advertisement

Check the reservation content.
Main unit
Select the TIMER number to be checked.
TIMER
MODE
When timer operation is not required
Main unit
Press so that all TIMER No. indicators are
TIMER
OFF.
MODE
To set the same timer program again
Main unit
Press so that the desired TIMER No. indica-
TIMER
tors light.
MODE

Sleep timer

Setting the number of minutes until the unit
is put to standby mode.
Main unit
1 Switch the unit from STANDBY mode to
ON mode.
ON/STANDBY
2 Set the time.
RC
SLEEP
GRC
ON/STANDBY
Main
Menu
ENTER
Main
Menu
ENTER
Sleep
ENTER
The reservation contents cannot be cleared. The contents are cleared
only when they are changed.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1
(Contents of the timer 1 are displayed.)
2 TIMER 2
(Contents of the timer 2 are displayed.)
3 TIMER 1, 2 (Contents of the timer 1 and timer 2 are displayed.)
4 TIMER OFF
÷ The reserved contents will be displayed for 2 seconds per item. After
this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the
beginning.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1
(Only the timer 1 is carried out.)
2 TIMER 2
(Only the timer 2 is carried out.)
3 TIMER 1,2 (Both timers 1 and 2 are carried out.)
4 TIMER OFF (No timer operation is carried out.)
÷ The reservation contents are held in memory.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1
(Only the timer 1 is carried out.)
2 TIMER 2
(Only the timer 2 is carried out.)
3 TIMER 1,2 (Both timers 1 and 2 are carried out.)
4 TIMER OFF (No timer operation is carried out.)
÷ Also prepare the disc or tape and adjust the listening volume.
÷ This unit is turned STANDBY automatically after the set time has
elapsed.
÷ The remaining sleep time can be displayed by selecting the Sleep icon
while the SLEEP indicator is lit.
÷ Each press decreases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
90=80=70...30=20=10=Cancel=90=80...
s L
P 9
E E
Duration for sleep timer.
To cancel
Turn STANDBY or select "Sleep" icon repeatedly until the
sleep time is cancelled.
Timer operation
C-V351/C-V301 (EN)
)
SLEEP
Lights up.
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C-v301

Table of Contents