Controls And Indicators - Kenwood C-V751 Instruction Manual

Controls and indicators

TUNED indicator
AUTO tuning mode
STEREO
Memory indicator
indicator
RDS indicators
AUTO STEREO
MEMO. TUNED
RDS EON TP
PTY TA NEWS
MUTE CLIP
CLIP indicator
MUTE indicator
1 2
ON/STANDBY
PHONES
$ %
The keys which have the same names as the controls on the
remote control unit provide the same functions as them.
1
(ON/STANDBY) key/indicator
Press to switch between ON and STANDBY.
2 Remote sensor
3 TIMER SET key
Press to set the timer function.
4 DIGITAL REC MODE key
Use to select the DIGITAL REC mode.
5 SET UP key
Use to select the surround sound settings.
6 SOUND key
Use to adjust the sound quality and ambi-
ence effects.
7 INPUT MODE key
Use to switch between the digital and analog
inputs.
8
DIGITAL key
Use to select the Dolby digital mode.
9 DTS key
0 CIRCLE SURROUND key
! LISTEN MODE key
Use to select the listening mode.
Standby mode
While the standby indicator of the unit is lit, a small amount of current is flowing into the unit's internal circuitry to back up the memory. This condition
is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.
Frequency display, input selector
display, preset channel display,
surround mode display
F M
A M
MW
LW
Broadcast band indicators
(AM : Australia only)
3 4 5
TIMER DIGITAL
SET UP SOUND
SET
REC MODE
RDS
TIMER
CLOCK
DISPLAY PTY
MODE
TAPE 2
INPUT / MONITOR
^& * ( ) ¡
@ MULTI. CONTROL key
0
Press to select various setting modes.
These keys are also used in the clock adjust-
ment and timer operations.
# GRC transmitter
T
Outputs the signals transmitted to the
Graphical Remote Control.
›
$ PHONES jack
For use in headphones listening.
£
% INPUT SELECTOR keys
Press to select the input.
ª
^ TAPE 2/MONITOR key
For use in monitoring of recording, etc.
& TIMER MODE key
*
Press to switch the timer modes.
* CLOCK key
p
Press when setting the clock.
( RDS DISPLAY key
Press to switch the RDS display.
p
) RDS PTY key
p
For use during reception of RDS broadcast-
p
ing.
DOLBY DIGITAL indicator
AUTO indicator
DTS indicator
PRO LOGIC
indicator
Receiving frequency
unit indicators
Display
6 7 8 9 0 ! @
CIRCLE LISTEN
DIGITAL DTS MULTI.CONTROL
SURROUND MODE
INPUT MODE
LEVEL
A.MEMO AUTO BAND PTY SELECT
TA/NEWS
TUNING
™ £ ¢ ∞
R
•
0
•
T
R
·
e
System connection
SOUND indicator
DIGITAL indicator
REC indicator
CS indicator
AUTO SOUND
DIGITAL REC
L C R
DTS DOLBY DIGITAL CS
LFE SW
PRO LOGIC 3 STEREO
MHz SLEEP DOWN MIX
LS S RS
KHz TIMER 1 2 TAPE2/MONI.
3 STEREO indicator
TIMER
STEREO indicator
indicators
DOWN MIX indicator
TAPE 2/MONI. indicator
SLEEP indicator
#
VOLUME CONTROL
OPEN/CLOSE
DOWN
UP
§ ¶
¡ RDS TA/NEWS key
For use during reception of RDS broadcast-
ing.
™ A.MEMO key
Press when using the auto memory func-
tion.
£ AUTO key
Press to select the tuning mode.
The auto tuning or manual tuning mode can
be selected.
Pressing and holding this key for more than
2 seconds changes the MD input display to
TAPE 1 display or the DVD input display to
DVD 6ch INPUT or LD display.
¢ BAND key
Press to switch the broadcasting band.
∞ TUNING keys (
,
Press to select the radio station to be re-
ceived.
§ OPEN/CLOSE key
¶ VOLUME CONTROL knob
11
Speaker selection
indicators
Input channel
indicators
Output channel
indicators
y
‚
0°
°
°
)
0
•