Convenient Functions; Display Dimmer Adjustment; Sleep Timer - Kenwood KRF-V8090D Instruction Manual

Ambience effects
Center Image mode (Neo:6 Music mode only)
In the CENTER IMAGE setting mode of the Neo:6 Music listen mode, it
is possible to enhance the center channel audio by adjusting the center
signal component.
1 Press the SOUND key, then press the 5/∞ keys or MULTI @/#
keys until "CENTER IMAGE" appears on the display.
SP MUTE
AUTO DETECT
A B CLIP
L R
• When the center speaker is switched OFF, this mode will not be
effective.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
left-center-right output.
SP MUTE AUTO DETECT
A B CLIP
L R
LFE
S SB
• Adjust the center component level.
3 Press the SOUND key again to return to the input indication.
Dual Mono mode (Dolby Digital mode only)
When the Dolby Digital source have Multiplex sound, you can select
Main / Sub sound for Audio output.
1 Press the SOUND key, then press the 5/∞ keys or MULTI @/#
keys until "DUAL MONO" appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the LISTEN mode is set to "Dolby
Digital".
2 Use the MULTI CONTROL knob or MULTI %/fi keys for the
following selection.
1 Main
: Multiplex Main channel output.
2 Sub
: Multiplex Sub channel output.
3 Main + Sub
: Multiplex Main + Sub channel output.
4 Stereo
: Main channel from the left speaker.
/ Sub channel from the right speaker.
SP MUTE
AUTO DETECT DIGITAL
A B CLIP
LFE
• The adjustment item is displayed for approximately 20 seconds.
3 Press the SOUND key again to return to the input indication.
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode other than DSP mode.
(96kHz fs indicator lights up)
• When the listen mode is set to DSP mode, the listen mode will
automatically be Stereo.
STEREO NEO:6
NEO:6
DOLBY DIGITAL STEREO

Convenient functions

Display dimmer adjustment

The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
For the remote control unit, press the RCV MODE key to switch
to receiver mode.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
SP MUTE
AUTO DETECT
A B CLIP
L R
LFE
SP
AUTO DETECT
A
L R
SP
AUTO DETECT
A
L R

Sleep timer

The sleep timer function turns the receiver OFF (to the standby mode)
automatically when the set timer period has elapsed. The sleep timer
period can be set in 10-minute steps up to 90 minutes.
For the remote control unit, press the RCV MODE key to switch
to receiver mode.
Press the SLEEP key repeatedly until the desired period before
turning the receiver OFF (standby mode) is displayed.
• Each press increments the sleep timer period by 10 minutes.
10 = 20 = 30 .....70 = 80 = 90 = Cancel = 10 = 20 = ...
SP MUTE DIGITAL
AUTO DETECT
A B CLIP
L C R
LFE
SL SR
• Pressing the SLEEP key after the sleep timer has started allows you
to check the remaining time period.
• To cancel the sleep timer, turn the receiver OFF (standby mode) or
press the SLEEP key repeatedly until the Sleep timer indicator
disappears.
DOLBY PL II x
DOLBY PL II x
DOLBY PL II x
The "SLEEP" indicator lights up
DOLBY DIGITAL STEREO
SLEEP
39 EN