Kenwood C-V751 Instruction Manual page 26

26
3 Adjust the levels of all the speakers than
the front speakers (left, right).
(Select the icon)
4 Repeat 3 until all the system's speakers
(except the subwoofer) play at the same
volume.
5 Press the "Test Tone" icon.
(Select the icon)
5
Adjust the input level. (analog sources only)
1 Select the "music" or "movie" icon in
the fixed segment screen.
2 Select the "Main" icon .
3 Enter the SETUP mode.
(Select the icon)
4 Select the "Input" icon.
(Select the icon)
5 Select the "Attenuation" icon.
(Select the icon)
To quit the SETUP mode
GRC
While test tone is output from a speaker,
adjust the volume level of the speaker.
To increase
To decrease
level level
GRC
or
÷ The test tones is not output from the speaker which has been set to
off. "Speaker settings"
C c h + 1 ) d B
F M
A M
S MW
LW
Display when test tone is output from a surround speaker
÷ Be sure to adjust from the listening position.
÷ Each press of the key increases or decrease the level by 1 dB.
÷ To set the subwoofer level, listen to familiar music or films that have
strong bass content and adjust the subwoofer level until it sounds
balanced with the rest of the speakers.
÷ When the volume level is increased during the "Test Tone" operation
and it is finished while the volume level is high, the increased volume
level will be maintained.
If the input level of an analog source signal is too high or the AV control
center's CLIP indicator lights, adjust the input level.
AUTO STEREO
MEMO. TUNED
RDS EON TP
PTY TA NEWS
MUTE
If the CLIP indicator lights with analog input, set the input level to -3
or -6 dB to avoid sound distortion.
÷ This adjustment is not available with DVD 6ch INPUT.
÷ This adjustment is not available when the input mode is DIGITAL.
÷ The selected input level can be stored in memory on a per-selector
basis.
I N P U T
TO STEREO
MO. TUNED F M
S EON TP
A M
Y TA NEWS MW
TE CLIP LW
Each press changes the level.
1 0 dB
2 -3 dB
3 -6 dB
GRC
Press the icon.
Speaker settings
£
AUTO SOUND
DTS DOLBY
PRO LOGIC
MHz SLEEP
KHz TIMER 1 2
1 0 F T 4.5
F M
A M
MW
CLIP LW
Input level
_
6
AUTO
DTS D
PRO LO
MHz S
KHz T