Digital Connections - Kenwood C-V751 Instruction Manual

Digital connections

Make connections as shown below.
The digital in jacks can accept DTS, Dolby Digital (AC-3) or PCM signals. Connect components capable of outputting DTS, Dolby
Digital (AC-3) or standard PCM (CD) format digital signals.
When connecting the related system components, be sure to also refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all connections are completed.
Connect components capable of output-
ting Dolby Digital (AC-3) or standard PCM
format digital signals.
An LD player and DVD player can-
not be connected simultaneously
when an RF demodulator is used.
VIDEO
PLAY PLAY
REC DVD/ MONITOR
6CH.INPUT OUT
VIDEO 1 VIDEO 2
CD MD/TAPE 1
L
R
REC PLAY PLAY PLAY REC
AC-3 DIGITAL OUT
CD DVD
(OPTICAL 1) (COAXAL)
DIGITAL IN
FRONT
TAPE 2/MON
PLAY REC PLAY
To connect an LD player with a DIGITAL RF OUT.
Connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Then connect the demodulator to the AC-3 AUDIO INPUT DIGITAL IN.
Connect the video signal and analog audio signals to LD jacks (See "Connection
of video components".)
DIGITAL OUTPUT RF INPUT DIGITAL INPUT DC IN
COAX. AC-3 RF COAX. OPT.
AC-3 RF OUT
AC-3 RF Demodulator
(DEM-9991D) (option)
COAXIAL DIGITAL OUT
The connected components are given as examples because the avail-
able models vary depending on marketing areas.
System connection
To connect an LD player
with a DIGITAL OUT
RCA pin cord
To connect a DVD player
with a DIGITAL OUT
Connect the video signal and analog audio
signals to the DVD jacks.
(See "Connection of video components".)
7
6
6