Convenient Functions; Display Dimmer Adjustment; Sleep Timer - Kenwood KRF-X9090D Instruction Manual

Convenient functions

Display dimmer adjustment

The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
For the remote control unit, press the RCV MODE key to switch
to receiver mode.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
SP MUTE
AUTO DETECT
A B CLIP
L R
LFE
SP
AUTO DETECT
A
L R
SP
AUTO DETECT
A
L R
42
EN
DOLBY PL II x
DOLBY PL II x
DOLBY PL II x

Sleep timer

The sleep timer function turns the receiver OFF (to the standby mode)
automatically when the set timer period has elapsed. The sleep timer
period can be set in 10-minute steps up to 90 minutes.
For the remote control unit, press the RCV MODE key to switch
to receiver mode.
Press the SLEEP key repeatedly until the desired period before
turning the receiver OFF (standby mode) is displayed.
• Each press increments the sleep timer period by 10 minutes.
10 = 20 = 30 .....70 = 80 = 90 = Cancel = 10 = 20 = ...
SP MUTE
AUTO DETECT DIGITAL
A B CLIP
L C R
LFE
SL SR
• Pressing the SLEEP key after the sleep timer has started allows you
to check the remaining time period.
• To cancel the sleep timer, turn the receiver OFF (standby mode) or
press the SLEEP key repeatedly until the Sleep timer indicator
disappears.
The "SLEEP" indicator lights up
DOLBY DIGITAL STEREO
SLEEP