Table of Contents
Advertisement
3
Set the speaker distance.
1 Measure the distance from the listening
position to each of the speakers.
2 Select a speaker distance.
(Select the icon)
3 Set "SP Distance".
(Select the icon)
To decrease
4 Touch
5 Repeat steps 3 and 4 for each speaker.
6 Press the "Next" icon.
(Select the icon)
4
Adjust the speaker level.
1 Select a speaker level.
(Select the icon)
2 Select "Test Tone" icon.
(Select the icon)
GRC
To increase
to select the speaker.
GRC
Jot down the distance from the listening position to each of
the speakers
FRONT (L/R)
:
CENTER (C)
:
SURROUND (LS/RS) :
Speaker distance
1 ) F T 3. ) M
÷ The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable in 1
foot (0.3 m) increments.
÷ The speakers you selected appear on the display. Confirm that all the
speakers have been correctly selected.
÷ The test tone which sounds like noise move across speakers in the
following sequence about 2 seconds.
TEST Lch
(Front speaker, Left)
TEST Cch
(Center speaker)
TEST Rch
(Front speaker, Right)
TEST RSch
(Surround speaker, Right)
TEST LSch
(Surround speaker, Left)
TEST SWch
(Subwoofer)
÷ Even when "Test Tone" is "Off", it is possible to select the speaker
with the
or
icon and adjust its level with the
Speaker settings
25
meter(s)
meter(s)
meter(s)
AUTO SOUND
DIGITAL REC
DIGITAL REC
L
C
R
DTS DOLBY
DIGITAL CS
PRO LOGIC
3 STEREO
LFE SW
MHz SLEEP
DOWN MIX
LS S RS
KHz TIMER 1 2 TAPE2/MONI.
or
icon.
Continued to next page
Hide quick links:
Advertisement
Table of Contents
