Clock Adjustment; Displaying The Time - Kenwood C-V751 Instruction Manual

Clock adjustment

This unit incorporates a clock function. Be sure to adjust the
correct time before using the timer function.
54
The time display blinks after a power failure or when the power
cord has been unplugged from the AC outlet and plugged in
again. In such a case, adjust the clock again.
Clock adjustment
1
Activate the clock adjustment mode.
Main unit
CLOCK
2
Enter the hour.
Main unit
MULTI.CONTROL
LEVEL
To decrease To increase
the figure the figure
CLOCK
3
Enter the minute.
Main unit
MULTI.CONTROL
LEVEL
To decrease To increase
the figure the figure
CLOCK

Displaying the Time

Each press of DISPLAY
switches the displayed
information alternately.
(Main unit only)
1 Press the CLOCK key.
1 Press and hold the CLOCK key for
more than 2 seconds. (The time dis-
play starts to blink.)
2 Set the figure of hour.
3 Press the CLOCK key.
1 Set the figure of minute.
2 Press the CLOCK key.
Main unit GRC
CLOCK
Example: Adjustment to 8:15
A M
÷ Press the CLOCK key. The hour is entered and the minute display
starts to blink.
A M
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the CLOCK key at the same moment as
a time announcement.
To switch between the 12-hour/24-hour display
(Main unit only)
Press and hold the CLOCK key
1 24-hour display
2 12-hour display
÷ From the second press, each press switches between 24h and 12h
alternately.
Timer operation
8: ) )
AUTO SOUND DIGITA DIGITA
DTS DOLBY DIGITA
PRO LOGIC 3 ST
DOWN
MHz SLEEP
KHz TIMER 1 2 TAPE2/
8:1 5
AUTO SOUND DIGITA DIGITA
DTS DOLBY DIGITA
PRO LOGIC 3 S
MHz SLEEP DOW
KHz TIMER 1 2 TAPE2