Table of Contents
Advertisement
❏
3. Mount the engine with the hardware that came with
the engine.
❏
4. Install a ball link on both the choke arm and the
carburetor arm. We have included both .080 and a 2-56
threaded balls, washer and nuts. Choose whichever one
best fi ts the hole in the arms. Be sure that you use thread
locker on the threads.
❏
5. Locate two plywood throttle pushrod supports. Glue
the longest support to the former shown in the photograph,
aligning it with the edge of the fuel tank tray.
❏
6. Glue the remaining support inside of the fuselage
as shown.
23
Advertisement
Table of Contents
