Wireless Mac Filtering - TP-Link TL-WR743ND User Manual

should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.

4.7.3 Wireless MAC Filtering

Choose menu "Wireless → MAC Filtering", and then you can control the wireless access by
configuring the Wireless MAC Filtering function, as shown in Figure 4-28.
To filter wireless users by MAC Address, click Enable. The default setting is Disable.
MAC Address - The wireless station's MAC address that you want to filter.
Status - The status of this entry, either Enabled or Disabled.
Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-29:
Figure 4-29 Add or Modify Wireless MAC Address Filtering entry
TL-WR743ND
Figure 4-28 Wireless MAC Filtering
- 62 -
150Mbps Wireless AP/Client Router