Operation Mode - TP-Link TL-WR743ND User Manual

Note:
The default PIN code of the Router can be found in its label or the QSS configuration screen as
Figure 4-3.
c). You will see the following screen when the new device successfully connected to the
network.
Note:
1. The QSS LED on the Router will light green for five minutes if the device has been
successfully added to the network.
2. The QSS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the QSS.

4.5 Operation Mode

The Router supports five operation mode types: Wireless Client Router, Wireless Router,
Wireless Repeater, Wireless Bridge and Wireless Client. Please select one your want. Click
Save to save your choice, which is shown as Figure 4-5.
Wireless Client Router - In this mode, the device enables multi-users to share Internet from
WISP. The LAN port devices share the same IP from WISP through Wireless port. While
TL-WR743ND
Figure 4-5 Operation Mode
- 32 -
150Mbps Wireless AP/Client Router