TP-Link TL-WR743ND User Manual page 15

c) AP Repeater Mode
Figure 2-3 Hardware Installation of the TL-WR743ND in AP Repeater mode
1. Plug one end of the provided power adapter into the POWER jack of the router, and the other
end to a standard electrical wall socket.
2. Press the power button of the router.
3. Power on the notebook(s).
Note:
It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet
cable, and then login the Router from the PC/notebook to set the Router in AP Repeater mode.
d) AP Bridge Mode
Figure 2-4 Hardware Installation of the TL-WR743ND in AP Bridge mode
1. Plug one end of the provided power adapter into the POWER jack of the router, and the other
end to a standard electrical wall socket.
2. Press the power button of the router.
3. Power on the notebook(s).
Note:
It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet
cable, and then login the Router from the PC/notebook to set the Router in AP Bridge mode.
TL-WR743ND 150Mbps Wireless AP/Client Router
- 8 -