TP-Link TL-WR743ND User Manual page 63

150mbps wireless ap/client router
Hide thumbs Also See for TL-WR743ND:
Table of Contents

Advertisement

Wireless Mode - If all of the wireless devices connected with this wireless router can
connect in the same transmission mode (e.g. 802.11b), you can choose "Only" mode (e.g.
11b only). If you have some devices that use a different transmission mode, choose the
appropriate "Mixed" mode.
Channel Width - The bandwidth of the wireless channel.
Max Transmit Rate - You can limit the maximum tx rate of the Router through this field.
Enable Wireless Router Radio - The wireless radio of the Router can be enabled or
disabled to allow wireless stations access. If enabled, the wireless stations will be able to
access the Router; otherwise, wireless stations will not be able to access the Router.
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless
router will broadcast its name (SSID) on the air.
SSID of Bridge - The SSID of the AP your Router is going to connect to as a client. You can
also use the survey function to select the SSID to join.
BSSID of Bridge - The BSSID of the AP your Router is going to connect to as a client. You
can also use the survey function to select the BSSID to join.
Survey - Click this button, you can search the AP which runs in the current channel.
Key type - This option should be chosen according to the AP's security configuration. It is
recommended that the security type is the same as your AP's security type
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the index of the WEP key.
Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
Be sure to click the Save button to save your settings on this page.
Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
With the Antenna in the upright position.
TL-WR743ND
150Mbps Wireless AP/Client Router
- 56 -

Advertisement

Table of Contents
loading

Table of Contents