Panel Layout; The Front Panel - TP-Link TL-WR743ND User Manual

Supports Flow Statistics
Supports firmware upgrade and Web management

1.4 Panel Layout

1.4.1 The Front Panel

The Router's LEDs and the QSS button are located on the front panel (View from left to right).
Name
PWR
SYS
WLAN
WAN,
LAN 1-4
Slow Flash
QSS
Quick Flash
Note:
After a device is successfully added to the network by QSS function, the QSS LED will keep on for
about 5 minutes and then turn off.
TL-WR743ND
Figure 1-1 Front Panel sketch
Status
Off Power is off.
On Power is on.
On The Router is initializing.
Flashing The Router is working properly.
Off The Router has a system error.
Off The Wireless function is disabled.
Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
There is a device linked to the corresponding port but
On
there is no activity.
Flashing There is an active device linked to the corresponding port.
A wireless device is connecting to the network by QSS
function. This process will last for about 2 minutes.
A wireless device has been successfully added to the
On network by QSS function. The LED will keep on for about
5 minutes.
A wireless device failed to be added to the network by
QSS function.
Table 1-1 The LEDs Description
150Mbps Wireless AP/Client Router
Indication
- 4 -