Table of Contents
Advertisement
Chapter 3
Method 3: Enter the Client's PIN
1. Keep the WPS Status as
2. Select
Enter new device
PIN
filed and click Connect. A success message will appear on the WPS page if the
client device has been successfully added to the access point's network.
3. 5.
Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
Note:
When working in Client mode, MAC Filtering is not available.
For
example, if you want a wireless client to access the access point, but other wireless
clients cannot access the access point, follow the steps below:
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
Wireless
>
Wireless MAC
Enabled
and click
Add
PIN, and then enter your client device's current PIN in the
Filtering.
Customize Your Network
device.
19
Hide quick links:
Advertisement
Table of Contents
