TP-Link TL-WR743ND User Manual page 14

a) AP Client Router Mode
Figure 2-1 Hardware Installation of the TL-WR743ND in AP Client Router mode
1. Connect the notebook/PC to the LAN port of TL-WR743ND router with an Ethernet cable.
2. Plug one end of the provided power adapter into the POWER jack of the router, and the other
end to a standard electrical wall socket.
3. Press the power button of the router.
4. Power on the PC(s) and notebook(s).
b) AP Router Mode
Figure 2-2 Hardware Installation of the TL-WR743ND in AP Router mode
1. Connect the PC(s)/Switch/Hub in your LAN to the LAN Ports on the Router.
2. Connect the DSL/Cable Modem to the WAN port on the Router.
3. Plug one end of the provided power adapter into the POWER jack of the router, and the other
end to a standard electrical wall socket.
4. Press the power button of the router.
5. Power on the Cable/DSL Modem, PC(s) and notebook(s).
TL-WR743ND 150Mbps Wireless AP/Client Router
- 7 -