Wireless Mac Filtering - TP-Link TL-WA901ND User Manual

4.6.3 Wireless MAC Filtering

Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to
control wireless stations accessing the device, which depend on the station's MAC address on the
following screen as shown Figure 4-24. This function is not available when the operation is set to
Client. As the configuration is the same in each operation mode, here we just take the Access
Point for example.
The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the
device, which depend on the station's MAC addresses.
Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address

Filtering. The default setting is disabled.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-25
Figure 4-25 Add or Modify Wireless MAC Address Filtering entry
MAC Address - Enter the wireless station's MAC address that you want to control.

Description - Give a simple description of the wireless station.

TL-WA901ND 450Mbps Wireless N Access Point User Guide
Figure 4-24 Wireless MAC address Filtering
52