TP-Link TL-WR743ND User Manual page 26

The Router provides Auto-Detect function and supports three popular ways PPPoE,
Dynamic IP and Static IP to connect to the Internet. It's recommended that you make use of
the Auto-Detect function. If you are sure of what kind of connection type your ISP provides,
you can select the very type and click Next to continue configuring.
2. If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-15.
2) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-17. Then you can go on with the wireless configuration.
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-16.
TL-WR743ND
Figure 3-14 WAN Connection Type
Figure 3-15 Quick Setup - PPPoE
- 19 -
150Mbps Wireless AP/Client Router