TP-Link TL-WR743ND User Manual page 20

2. After a successfully login, you can click the Quick Setup menu to quickly configure your
Router.
3. Click Next, and then Choose Operation mode page will appear, shown in Figure 3-6.
Note:
The Router supports five operation modes for multi-user to access the Internet: AP Client Router, AP
Router, AP Repeater, AP Bridge and Client. In AP Client Router mode, it can access the Internet
wirelessly by your WISP's support. In AP Router mode, it can access the Internet via ADSL/Cable
Modem. In AP Repeater mode, the AP will relays data to an associated root AP. In AP Bridge mode,
the device bridge to another AP. In Client mode, the device will act as a wireless station to enable
wired host(s) to access AP. You can configure your device quickly by the following steps in
different modes.
A. When you choose AP Client Router on Choose Operation mode page in Figure 3-6 , take
the following steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-7
TL-WR743ND
Figure 3-5 Quick Setup
Figure 3-6 Choose Operation Mode
- 13 -
150Mbps Wireless AP/Client Router