Wireless Mac Filtering - TP-Link TL-WA901ND User Manual

450mbps/300mbps wireless n access point
Hide thumbs Also See for TL-WA901ND:
Table of Contents

Advertisement

Chapter 4
Note:
• If you do not set the key, the wireless security function is still disabled even if you have selected Shared
Key as Authentication Type.
• You will be reminded to reboot the device after clicking the
4. 4. 3.
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses. This function is not available when the operation
is set to Client. As the configuration is the same in each operation mode, here we just
take the Access Point for example.
I want to:
Downloaded from
ManualsNet.com
Key Type
- You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
• For
64-bit
encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 5 ASCII characters.
• For
128-bit
encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 13 ASCII characters.
• For
152-bit
encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 16 ASCII characters.

Wireless MAC Filtering

Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For
example, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the access point,
but other wireless clients cannot access the access point.
1. Visit http://tplinkap.net, and log in using
for both username and password.
2. Go to
3. Click
4. Select
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click
search engine
Save
button.
Wireless
>
Wireless MAC
Enable
to enable the Wireless MAC Filtering function.
Allow the stations specified by any enabled entries in
as the filtering rule.
Add New
and fill in the blank.
Configure the Access Point
admin
(all lowercase)
Filtering.
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-wa801nd

Table of Contents