Using A Ktd-405/Ktd-405-2D Keypad - GE TruVision DVR 20 User Manual

Note: If there is only one TVR 20 used, the default DVR button is 1. If more than
one TVR 20 is used, they must each be first allocated an ID for remote control. See
"Audio, remote control, language settings and playback replay time" on page 96
for more information.
Troubleshooting the remote control:
If the remote control is not functioning properly, perform the following tests:
• Check the battery polarity.
• Check the remaining charge in the batteries.
• Check that the remote control sensor is not masked.
If the problem still exists, please contact your administrator.

Using a KTD-405/KTD-405-2D keypad

Use the keypad to carry out functions similar to the front panel buttons. We use the
KTD-405/KTD-405-2D keypad controller (Figure 2) in this manual. For detailed keypad
instructions, refer to the KTD-405/KTD-405-2D Controller Keypad User Manual.
Setting up a KTD-405 keypad to work with the TVR 20
To set up a KTD-405 keypad to work with the TVR 20:
1. Press and hold the set key of the keypad until Enter programming code displays.
2. At the code entry display, enter the programming code 9, 5, 1. Then press the seq
button.
3. At the first menu display, press 1 to select the option Switcher/ MPLX.
4. At the Switcher/MPLX screen, press 2 to select the option Calibur.
5. At the Enter Calibur Address screen, enter the bus address of the TVR 20. See the
section "RS-232 and RS-485 port settings" on page 96 for information on the bus
address of your TVR 20.
To access the PTZ camera's programming menus using a KTD-405 keypad:
1. Switch the keypad to the camera you want to program.
2. Press and hold the set key until Enter programming code displays.
3. At the code entry display, enter the programming code 9, 5, 1. Then press the seq
button.
4. At the first menu display, press 3 to select the option Camera.
5. At the Enter camera number screen, enter the site number of the PTZ camera you
wish to program. Camera default value is 1. The Main Page 1 menu appears.
TruVision DVR 20 User Manual
51BChapter 4: Operating instructions
29