GE TruVision DVR 20 User Manual page 69

Option
Camera
Title
Dual stream
Resolution
Record quality
Frame rate
Alarm frame rate
Event frame rate
Record mode
Covert
TruVision DVR 20 User Manual
Description
Select the camera number.
Assign a title to the selected camera. Every camera must have a unique
title. If no title is assigned, the camera is auto-numbered. A title
supports up to 16 characters.
Using the virtual keyboard, enter the camera title.
Select dual or single stream.
Select the recording resolution depending on the video format.
 PAL: 704 x 576 / 704 x 288 / 352 x 288 / 176 x 144 (QCIF, B stream
only)
 NTSC: 704 x 480 (4CIF)/ 70A x 240 2CIF)/ 352 x 240 (CIF) / 176 x 120
(QCIF, B stream only)
Select the image quality for the recording from a scale of 1 to 5, where
5 is the highest image quality. A higher image quality uses more HDD
space.
Set the frame rate. The frame rate (fps) is determined by the maximum
recording rate of the DVR (displayed in the bottom left corner) divided
by the number of installed cameras. If you change the resolution value,
the frame rate value is automatically adjusted. The frame rate values
available are: Full, 25 fps PAL (30 fps NTSC), 20, 16, 12, 10, 8, 6 (default),
4, 2, 1, 1/2, 1/4, 1/8, 1/16. Real time is 25 fps PAL (30 fps NTSC.)
Select a value.
Set the frame rate at which the alarm is recorded. See section
"Responding to an alarm" on page 73 for more information. The frame
rate values available are: Full, 25 fps PAL (30 fps NTSC), 20, 16, 12, 10, 8,
6 (default), 4, 2, 1, 1/2, 1/4, 1/8, 1/16.
Select a value.
Set the frame rate at which the event is recorded. See section
"Responding to an alarm" on page 73 for more information. The frame
rate values available are: Full, 25 fps PAL (30 fps NTSC), 20, 16, 12, 10, 8,
6 (default), 4, 2, 1, 1/2, 1/4, 1/8, 1/16.
Select a value.
Set when the camera records. There are five options to choose from:
 Always: Camera is always recording.
 Disabled: No recording
 Event: Only records when an event is detected.
 Alarm: Only records when an alarm is triggered.
 Event+Alarm: Records when either an alarm or event is detected.
Select one of the five record modes.
Use to hide the camera picture in live and sequence modes. However,
the image will still be recorded and can be played back by any user who
has playback rights.
Check the check box to enable.
53BChapter 6: Advanced setup
65