Ddns Settings - GE TruVision DVR 20 User Manual

53BChapter 6: Advanced setup
Option
DNS Server 2
HTTP Port
Bandwidth Cutoff
4. All changes are saved when you move to another screen.

DDNS settings

Use the DDNS screen to select the DNNS service.
To define DDNS settings:
1. In the Menu toolbar click the Network icon to display the Network screen.
2. Click the DDNS submenu. The DDNS submenu screen appears.
3. Select one of the three options listed:
Ezddns.org
www.dyndns.org
Disable
4. Click the Register/Update button.
5. All changes are saved when you move to another screen.
E-mail settings
The TVR 20 has the option to send e-mail notifications of alarm events through the
network. E-mails can be sent to up to three different addresses. Use the Email Setting
screen (shown in Figure 44 on page 87) to configure the e-mail settings.
86
Description
Set the secondary DNS server for your network.
Enter the secondary DNS value.
Set the port number for the HTTP/WEB communication.
Enter a port value.
You can limit the network bandwidth used by a DVR in order to
maintain resources on the network.
Enable or disable the option.
Select as DDNS provider.
Enter the name you have given to the TVR 20 unit.
Click the Register/Update button to submit and register your name on the
server.
Select as DDNS provider.
The following options then appear on-screen:
Host name: Enter the host name created through the DynDNS account.
User name: Enter the user name of the DynDNS account.
Password: Enter the DynDNS account password.
Confirm: Re-enter the password.
Note: For more information on DDNS setup, see"DDNS settings" above.
If DDNS is not used, select Disable.
TruVision DVR 20 User Manual