Alarm And Event Settings - GE TruVision DVR 20 User Manual

53BChapter 6: Advanced setup
To copy camera settings to other cameras:
1. In the menu toolbar click the Camera icon.
2. Click the Copy Setting submenu. The Camera Copy Setting screen appears.
3. Change the settings, as required:
Option
Source
Copy to
Note: The camera title and its PTZ preset settings are not copied.
4. A message appears confirming the cameras selected. Click OK to start copying.
Changes are automatically saved when you move to another screen.

Alarm and event settings

This section describes setting up how the system will respond when an alarm is
triggered. You can change these settings in any order.
All changes made to the Alarm menu apply to all cameras.
You also need to set up when the system will respond to alarm and events. See
"Schedule settings" on page 79.
Note: A camera's recording mode must be first set up to be able to record an alarm
or event. See "Basic camera setup" on page 64 for further information.
72
Description
Camera: Select the source camera.
Camera setting: Check if you want the basic settings copied.
Motion detection: Check if you want the motion detection settings
copied.
Video adjust: Check if you want the video adjust settings copied.
Select to which cameras you want the settings copied.
TruVision DVR 20 User Manual