Output Symbol Rate, Qam Modulation - Triax CC2CT 800 C Assembly Instruction Manual

Channel setting:
• Use buttons
• Use buttons
Frequency setting (42,0 MHz ... 860,0 MHz):
• Use buttons
• Use buttons
• Press the
o
u t P u t
In this menu you can set the output symbole rate, the QAM modulation and invert
the user signal.
Output symbole rate:
In this menu item you can set the output symbole rate.
• Use the
of e.g. "6900" and set the symbol rate with the buttons
to select the cursor position for channel setting.
to adjust the desired channel.
to select the cursor position for frequency setting.
to adjust the desired frequency.
button.
—> The "Output symbol rate, QAM modulation" – "QAM-MODE" sub-
menu is activated.
, qam
s ym b o l r at e
buttons to place the cursor under the number to be changed
—> A displayed "!" indicates an output data overflow (page 33).
In this case increase the output symbol rate or the QAM modulation
or remove stations from the data stream using the station filter.
Bx 4A/B FREQ
C66 834.00 MHz
Bx 4A/B FREQ
C66 834.00 MHz
m o d u l at i o n
Bx 4A ! QAM–MODE
6900 QAM 256 POS
Bx 4A !
- 20 -
QAM–MODE
.
CC2CT 800 C