Introduction; Unpacking And Components - Unitron MEC2 Manual

INTRODUCTION

Congratulations on the purchase of your new UNITRON
engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if
used and maintained properly. UNITRON
by our staff of trained technicians in our New York facility. Careful quality control procedures ensure each
microscope is of the highest quality prior to shipment.

UNPACKING AND COMPONENTS

Your microscope arrived packed in a molded shipping carton. Do not discard the carton: the shipping
carton should be retained for reshipment of your microscope if needed. Avoid placing the microscope in
dusty surroundings or in high temperature or humid areas as mold and mildew can form. Carefully
remove the microscope from the shipping carton and place the microscope on a flat, vibration-free
surface.
COMPONENT DIAGRAMS
Interpupillary Distance Indicator
Diopter Adjustment Collar
Light Path Selector Lever
Illumination Intensity
Adjustment Dial
Tension Adjustment Collar
®
UNITRON
MEC2 INVERTED METALLURGICAL MICROSCOPE
®
microscopes are carefully assembled, inspected and tested
On/Off Switch
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
®
microscope. UNITRON
Coarse Focusing Knob
®
microscopes are
Fine Focusing Knob
4