Introduction; Unpacking And Components - Unitron Versamet 4 Manual

INTRODUCTION

Congratulations on the purchase of your new UNITRON
engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if used
and maintained properly. UNITRON
staff of trained technicians in our New York facility. Careful quality control procedures ensure each
microscope is of the highest quality prior to shipment.

UNPACKING AND COMPONENTS

Your microscope arrived packed in a molded shipping carton. Do not discard the carton: the carton
should be retained for reshipment of your microscope if needed. Avoid placing the microscope in dusty
surroundings or in high temperature or humid areas as mold and mildew will form. Carefully remove the
microscope from the EPE foam container by its arm and base and place the microscope on a flat,
vibration-free surface. Check the components against the following standard configuration list:
Optional accessories such as optional objectives and/or eyepieces, slides sets, etc., are not shipped as
part of the standard equipment. These items, if ordered, are shipped separately.
UNITRON
VERSAMET 4 INVERTED METALLURGICAL MICROSCOPE
®
microscopes are carefully assembled, inspected and tested by our
 Stand, which includes the
supporting arm, trinocular
viewing head, and
focusing mechanism
 Eyepieces as ordered
 Roll-down eyeguards
 Nosepiece
 Nosepiece lock screw
 Objectives as ordered
 Mechanical stage
 Stage plate inserts
 Stage clips (pair)
 Illuminator
 Color Filter slider
 Green, yellow and clear daylight blue
 Polarizer slider
 Analyzer slider
 360° rotatable analyzer slider
 DIC slider (optional)
 3-prong electric power cord
 Hex screwdriver
 Hex screwdriver magnetic mount
 Dust cover
 Instruction manual
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
®
microscope. UNITRON
®
microscopes are
4