Vivax ACP-12CT35GECI Service Manual page 60

12. Remove solenoid coil
Remove the screw fixing the solenoid coil and
then remove the coil.
13. Remove liquid valve and gas valve
Unsolder the welding joint connecting the capillary,
valves and the outlet pipe of condenser; remove the
2 screws fixing the gas valve and unsolder the
welding joint between the gas valve and the
air-return pipe to remove the gas valve. (NOTE:
Discharge the
unsoldering; when unsoldering, wrap the gas valve
with a wet cloth completely to avoid damage to the
valve caused by high temperature).
Remove the 2 screws fixing the liquid valve and
unsolder the welding joint connecting the liquid
valve to the Y-type pipe to remove the liquid valve.
14. Remove compressor
Unsolder the welding joint connecting the 4-way
valve assy with the compressor and the
condenser, and then remove the 4-way valve
assy; unsolder the welding joint connecting the
capillary and the outlet pipe of condenser to
remove the capillary. (Do not block the capillary
with welding slag during unsoldering.)
Remove the foot nuts of the compressor and then
remove the compressor.
56
refrigerant completely before
solenoid coil
4-way valve assy
Removal Procedure
liquid valve
gas valve
capillary sub-assy
compressor