Removal Procedure
8. Remove motor and motor support
Remove the 4 tapping screws fixing the motor;
disconnect the leading wire insert of the motor,
and then remove the motor.
Remove the 2 tapping screws fixing the motor
support and lift the motor support to remove it.
9. Remove electric box
Remove
screws
subassembly; loosen the wire bundle and unplug
the wiring terminals. Then lift the electric box to
remove it.
10. Remove isolation sheet
Remove the 3 screws fixing the isolation sheet
and then remove the isolation sheet.
11. Remove soundproof sponge
Remove the soundproof sponge wrapping the
compressor.
fixing
the
electric
box
motor
isolation sheet
soundproof sponge
motor support
electric box
55