Vivax ACP-12CT35GECI Service Manual page 23

Function and Control
1
ON/OFF :
Press this button to turn on the unit .Press this button again to turn off the unit.
2
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly
decreases set temperature. In AUTO mode, set temperature is not adjustable.
+ :
3
Press this button to increase set temperature.Holding it down above 2 seconds rapidly
increases set temperature. In AUTO mode, set temperature is not adjustable.
4
MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO,
COOL,DRY, FAN,and HEAT * , as the following:
AUTO
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed on the LCD, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
5 FAN
:
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,
Auto
Low speed
SWING:
6
Press this button to set up &down swing angle, which circularly changes as below :
This remote controller is universal . If any command
the unit will carry out the command as
indicates the guide louver swings as:
I FEEL:
7
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function.
8
/
Press this button to achieve the on and off of healthy and scavenging functions in
operation status.Press this button for the first time to start scavenging function;
LCD displays"
functions simultaneously; LCD displays"
time to quit healthy and scavenging functions simultaneously. Press the button for the
fourth time to start healthy function; LCD display "
the operation above.
COOL DRY FAN HEAT
,
to
Low-Medium speed
Medium-High speed
". Press the button for the second time to start healthy and scavenging
*Note:Only for models with heating function.
,
then back to Auto.
High speed
OFF
,
" . Press this button for the third
" and "
" . Press this button again to repeat
,
Medium speed
or is sent out,
19