Switching The Device Off Completely / Hard Reset - Medion GoPal E4x70 Instruction Manual

8.2. Switching the Device off Completely / Hard Reset
ATTENION!
A hard reset will delete all data in the temporary memory.
Your navigation system will normally be in the Standby Mode, if you have switched
it off by pressing the on/off button briefly. In addition, the system can be switched
off completely; the consumption of energy can be kept as low as possible through
this. All the data in the temporary memory will be lost if the device is switched off
completely (hard reset). To switch your navigation system off completely:
 Press and hold the On/Off key (> 3 sec.), to switch off the device.
 Press and hold the On/Off key (> 3 sec.), to switch the device on again.
A reinstallation will not be necessary after a hard reset if your device has already
been equipped with the basic data of the navigation software in the permanent
memory.
28 of 82