Resetting The Navigation System; Reset; Switching The Device Off Completely / Hard Reset - Medion Navigation Unit Operating Instructions Manual

Resetting the Navigation System

You will have the possibility of resetting your navigation system if it is no longer reacting
or working properly.
This option restarts the navigation system, without reinstallation being necessary. A reset is
often used in order to reorganize the memory. In doing so all programs that are running
are interrupted and the working memory is reinitialized.
You will have the possibility of carrying out two different Reset procedures with your de-
vice.

Reset

The following screen will appear if you press the On/Off switch for a short time:
If you want to carry out a Reset, tap on
You will find further information in chapter Fehler! Verweisquelle konnte nicht ge-
funden werden., page 15.

Switching the Device off Completely / Hard Reset

Attention!
A hard reset will delete all data in the temporary memory.
Your navigation system will normally be in the Standby Mode, if you have switched it off
by pressing the on/off button briefly. In addition, the system can be switched off com-
pletely; the consumption of energy can be kept as low as possible through this. All the
data in the temporary memory will be lost if the device is switched off completely (hard reset).
Switch your navigation system off completely in this way:
1. Push the Main switch to the position OFF to swich the device off.
2. Push the Main switch to the position ON agian to carry out the Hard Reset.
UK/ N. IRELAND HELPLINE 0871 37 61 020
REP. IRELAND HELPLINE 1-800-992508
.
- 22 -