Synchronisation With The Pc; Installing Microsoft® Activesync - Medion GoPal E4x70 Instruction Manual

22. Synchronisation with the PC

22.1. Installing Microsoft® ActiveSync®
In order to transfer data between your PC and your navigation system you need the
Microsoft® ActiveSync® program.
The cost of the navigation system includes a license for this program which can be
found on the CD/DVD.
PLEASE NOTE!
You will not need the ActiveSync® communications software, if you
are a user of the Windows Vista® / Windows® 7 / Windows® 8 operating
system. The system files necessary for the simple data transfer are
already integrated into your operating system.
Please connect your device to your PC with the aid of the USB
synchronisation cable. Once a new device has been found, the required
driver will be automatically installed. After successful installation, your
device will be listed in Windows Explorer under the item "portable
devices".
ATTENTION!
Important files can be overwritten or changed during the
installation of software. You should create a hard disk backup,
in order to be able to have access to the original files in the case
of possible problems following the installation.
PLEASE NOTE!
You should not connect the navigation system to your computer yet.
 Insert the CD/DVD and wait until the program starts automatic.
PLEASE NOTE!
If it does not function, the Auto Run function is probably deactivated.
The Setup program on the CD/DVD must be started, to start installation
manually den.
 Choose the language, click then Install ActiveSync® and follow the instructions
on the screen.
PLEASE NOTE!
When installing the GoPal Assistant, ActiveSync® will be installed
automaticalllliert.
67 of 82