Resetting the Navigation System
Soft Reset
Choose this option if your navigation system is not responding or
working properly.
This option restarts the navigation system, without reinstallation
being necessary. A soft-reset is often used in order to reorganize
the memory. In doing so all programs that are running are inter-
rupted and the working memory is reinitialized.
Perform the soft-reset as follows:
Press the tip of the stylus into the soft-reset switch opening or
insert a pointy object (e.g. a paper clip, which has been bent
open) with slight pressure into the reset opening.
Hard Reset
Warning
A hard-reset deletes all data on your appliance and
causes a new initial installation.
It is not necessary to install the software on your synchronisation
computer again, however.
Perform the hard-reset as follows:
1. Remove the external power source.
2. Push the On/Off switch of the device on the back of the de-
vice first to the OFF position initially and back to ON after
2 seconds.
3. It will be necessary to carry out the software installation
again after a Hard Reset.
24
English