Resetting The Navigation System; Soft Reset; Hard Reset - Medion Navigation Unit Manual

R
ESETTING THE NAVIGATION SYSTEM
There are two options for resetting the navigation system.
S R
OFT ESET
This option restarts the navigation system, without reinstallation
being necessary. A soft-reset is often used in order to reorganize
the memory. In doing so all programs that are running are inter-
rupted and the working memory is reinitialized.
Choose this option if your navigation system is not responding or
working properly.
Perform the soft-reset as follows:
Screw off the end cap of the pointer (see page 12,
fully press the point of the end cap into the reset opening or push a
pointed object (e.g. a bent paper clip) into the reset opening with
slight pressure.
H R
ARD ESET
!
Warning: A hard-reset deletes all data on your
appliance and causes a new initial installation.
It is not necessary to install the software on your synchronisation
computer again, however.
Perform the hard-reset as follows:
1. Push the On/Off switch on the back of the device to the
OFF position initially and back to ON after 2 seconds.
2. It will be necessary to carry out the software installation
again after a Hard Reset.
O
PERATING
) and care-
25